Skid Steer & Tractor Attachments and Accessories

Skid Steer Pallet Forks

Standard ITA Class II 1-1/4” x 4” Pallet Tines (3000# rating)

Optional 1-1/2” x 4” Pallet Tines (4500# rating)

Stock Lengths: 42”, 48”, 60”

ITA Style Top Crossbar

Open Back for Visibility

3/8” x 2” Bar Top Rack Flush with Working Face of Tines

Standard Foot Steps

Powder Coated

Skid Steer Power Tilting Attachment

Rotates 60 Degree Each Direction

(2) (2) 3x8 Welded Cylinders

Spherical Main Bearings and Plastic Thrust Plates

Shown with Pallet Forks (Other Mounts Available)

Mark Krum

 

22585 Carroll Road

Morrison, IL 61270

Phone: 815-772-8296

Cell: 815-275-2259

www.krumkreations.com

E-mail: krumkreations2001@yahoo.com

John Deere 600/700 Series Pallet Forks

Standard ITA Class II 1-1/2” x 4” Pallet Tines (4500# rating)

Optional 1-3/4” x 4” Pallet Tines (6000# rating)

Stock Lengths: 42”, 48”, 60”

ITA Style Top Crossbar

Open Back for Visibility

Uses Standard OEM John Deere Latches

Powder Coated

Skid Steer 5’ Class III Carriage Pallet Forks

60” Wide Frame as Compared to the Standard 44” Wide Frame

Heavier Construction than the Standard Frames

Standard Class III Pallet Tines (# rating)

ITA Style Top Crossbar

Open Back for Visibility

1/2” x 2” Bar Top Rack Flush with Working Face of Tines

Phone: 815-772-8296  or   Cell: 815-275-2259

www.krumkreations.com

Euro/Global Pallet Forks

Standard ITA Class II 1-1/4” x 4” Pallet Tines (3000# rating)

Optional 1-1/2” x 4” Pallet Tines (4500# rating)

Stock Lengths: 42”, 48”, 60”

ITA Style Top Crossbar

Open Back for Visibility

3/8” x 2” Bar Top Rack Flush with Working Face of Tines

Standard Foot Steps

Powder Coated

Skid Steer Bale Spear

SHW or Kverneland Stabber Tines

SAE Standard Skid Steer Mount

Round Bale and Large Square Bale Setups Available

Optional 2-Bale Kit is Height Adjustable (High & Low Positions)

John Deere 600/700 Series Loader Bale Spear

SHW or Kverneland Stabber Tines

Optional 2-Bale Kit

Utilizes OEM John Deere Latches

John Deere 200/300/400/500 Series Pallet Forks

Standard ITA Class II 1-1/4” x 4” Pallet Tines (3000# rating)

Optional 1-1/2” x 4” Pallet Tines (4500# rating)

Stock Lengths: 42”, 48”, 60”

ITA Style Top Crossbar

Open Back for Visibility

3/8” x 2” Bar Top Rack Flush with Working Face of Tines

Standard Foot Steps

Powder Coated

Phone: 815-772-8296  or   Cell: 815-275-2259

www.krumkreations.com

Euro/Global Bale Spears

Grapple Bucket

3/4” T-1 Tines with Replaceable Hardened Teeth

3” x 8” Welded Cylinders with Greaseable Ends

Pivots on (4) 1-1/4” Hardened Steel Bushings with Greaseable Pins

Zerks are Countersunk for Protection

Available Widths of 70”, 80”, or 90”

Pengo Post Hole Augers Distributor

 

John Deere 200/300/400/500 Series Bale Spear

 

Phone: 815-772-8296  or   Cell: 815-275-2259

www.krumkreations.com

Tree Puller

3/4” T-1 Jaws will Clamp up to an 8” Tree or Post

3000psi 3” x 8” Tie-Rod Cylinder

SAE Standard Skid Steer Mount

Open Back for Visibility

Cylinder Guard

Manure Squeegee

Skid Steer or Tractor Mount

1-1/2” x 10” Reversible Rubber

Adjustable Skid Shoes

Ends Angled on Back-Drag Blade for More Volume

Manure Fork Grapple

SHW 32” Replaceable Tines (Rated 3372 lb @ 20”)

2” x 8” Welded Cylinder

Tubular Frame

7” Spacing on Tines

Tapered Mounting Bushing with Nut on Tine

John Deere 200/300/400/500 Series Manure Fork Grapple

SHW 32” Replaceable Tines (Rated 3372 lb @ 20”)

2” x 8” Welded Cylinder

Tubular Frame

7” Spacing on Tines

Tapered Mounting Bushing with Nut on Tine

Phone: 815-772-8296  or   Cell: 815-275-2259

www.krumkreations.com

Skid Steer to John Deere 600/700 Loader Adapter

Use Your John Deere Loader Attachments on Your Skid Steer

Blasted and Powder Coated John Deere Green

 

Bobtach Conversion Brackets

Custom Built to Application

Rock Bucket

Main Tines Made of 3/4” x 2” Solid Steel on 8” Centers

1/2” x 2” Steel Dividers Between Main Tines to “Catch” Smaller Rocks Leaving 2” Between Tines

Replaceable Hardened Teeth

Buckets

Dirt and High Volume Buckets

7 Gauge Wrap

3/4” x 6” Wear Edge (1060 Grade)

Optional Side Cutters (1060 Grade)

Optional Bolt on Reversible Edge (1080 Grade)

Available Parts

Cutting Edges : Bolt On & Weld In

Bolt in (1080 Grade)

Stock Size: 5/8” x 8”

 

Weld in (1060 Grade)

Stock Sizes: 1/2” x 3’, 1/2” x 4”, 3/4” x 6”

 

Bale Spears & Bushings

SHW & Kverneland

Universal Snowplow Mount

Mount your truck snowplow on your Skid Steer or pin on a 2” receiver tube to move trailers, etc.

Set up for Meyer, Western, or Fisher truck snowplows

Pin on modules make this mount more adjustable and other modules can be added

Econo Snowplow Mount

Mount your truck snowplow on your Skid Steer or use it as a 2” receiver tube to move trailers, etc.

Set up for Meyer, Western, or Fisher truck snow plows

Phone: 815-772-8296  or   Cell: 815-275-2259

www.krumkreations.com

Phone: 815-772-8296  or   Cell: 815-275-2259

www.krumkreations.com

Skid Steer

Euro/Global

Mounting Plates

Weld to Bucket or Attachment

John Deere 600/700 Series

Pallet Tines

Tip Drilling

ITA Class II 16” Carriage

1-1/4” x 4” (3000#), 1-1/2” x 4” (4500#), 1-3/4” x 4” (6000#)

Stock Lengths : 42”, 48”, 60”

John Deere 200/300/400/500 Series